Powerfix Z32114 Manuel d'utilisateur télécharger pdf (Page 18)

18 GB/IE

Measure a distance as described in the section

„Measuring distances“. As an example, „2m“

will appear on the display.

In order to set the measuring unit of foot,

proceed as described in step 1 to 3:

1. Press the MODE button

and keep it

pressed.

2. Press the READ button

while keeping the

MODE button pressed.

3. To set the measuring unit of foot release the

READ button ﬁrst, followed by the MODE but-

ton. As an example,“6’07“” will appear on

the display if you have measured a distance

of 2 m.

4. In order to switch between the measuring

units of foot and metre once again, proceed

as described in step 1 to 3.

Addition of distances

With the appliance you can add the measured

distances together:

1. Measure the ﬁrst distance as described in the

section „Measuring distances“.

2. Press the + / = button

. The message „+“

appears in the display

and the measured

distance in the row below.

3. Measure the next distance. The new distance

measured is shown in the upper row of the

display.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 140 141

Pas de commentaire

Powerfix Z32114 Manuel d'utilisateur Page 18